Using A Custom Box - Kyocera TASKalfa 250ci Operation Manual

Document Box

Using a Custom Box

NOTE:
In the following explanation, it is assumed that user login administration is enabled. For details on User
Logon privileges, refer to User Privileges on page 3-47.
Creating a New Custom Box
Use the procedure below to create a new box in the user box.
Custom Box.
No. Name Owner
0001 SALES Anonymous
Store File
Custom Box Job Box Removable Memory
Status
Box No
Box Name
Box Password
6-2
Used Area
- - - -
Register/Edit
1/1
Box
Detail Open
FAX Box
2008/10/10
Item
Enter the box number by pressing [-, +] or
number keys.
The box number can be from 0001 to 1000. A
Custom Box should have a unique number.
If you enter 0000, the smallest number available
will be automatically assigned.
Enter a box name consisting of up to 32
characters.
Refer to the Character Entry Method on
Appendix-7 for details on entering characters.
User access to the box can be restricted by
specifying a password to protect the box.
Entering a password is not mandatory.
Enter the same password of up to 16 characters
in both [Password] and [Confirm Password].
1
Press the Document Box key.
2
Press [Custom Box] and then [Register/Edit Box].
10:10
3
Press [Add].
4
Press [Change] for each item, enter the information
and then press [OK].
The table below lists the items to be set.
Detail
OPERATION GUIDE