Kyocera TASKalfa 250ci Operation Manual page 328

Default Setting (System Menu)
Color Calibration
After prolonged use, or from the effects of surrounding temperature or humidity, the hue of printed color output
may shift or color drift may occur. Using this function enables printing in the most appropriate color by adjusting
hue and color drift in detail. Use gray adjustment when the color is not enhanced even after performing color
calibration (see page 8-62). If the hue and color are not enhanced, use color registration (see page 8-58).
Developer Refresh
When the printing is too light or incomplete, even though there is enough toner, refresh the developer.
Laser Scanner Cleaning
If white or color streaks appear on images, perform Laser Scanner Cleaning.
8-64
1
Press the System Menu key.
2
Press [ ], [Adjustment/Maintenance], [
then [Next] of Color Calibration.
3
Press [Execute]. Color Calibration begins.
4
Press [OK] after Color Calibration is complete.
1
Press the System Menu key.
2
Press [ ], [Adjustment/Maintenance], [
then [Next] of Developer Refresh.
3
Press [Execute]. Developer Refresh begins.
NOTE:
Waiting time may be longer when the toner is
refilled during developer refresh.
4
Press [OK] after Developer Refresh is complete.
1
Press the System Menu key.
2
Press [ ], [Adjustment/Maintenance], [
then [Next] of Laser Scanner Cleaning.
3
Press [Execute]. Laser Scanner Cleaning begins.
4
Press [OK] after Laser Scanner Cleaning is
complete.
] and
] and
] and
OPERATION GUIDE