Kyocera TASKalfa 250ci Operation Manual page 278

Default Setting (System Menu)
Special Paper Action
When printing on Prepunched, Preprint, and Letterhead, punch-holes might not be aligned or the print direction
might be upside-down depending on how originals are set and the combination of copying functions. In such a
case, select [Adjust Print Direction] to adjust the print direction. When paper orientation is not important, select
[Speed Priority].
The table below lists the available settings and their details.
Adjust Print Direction
Speed Priority
If you select [Adjust Print Direction], load paper according to the steps below.
Example: copying on Letterhead
Original
Original
NOTE:
When loading cover paper in a cassette or multi purpose tray, load the face, on which printing is
supposed to be done, upward.
Use the procedure below to specify the actions performed for special paper types.
8-14
Item
Adjust print direction. Print speed is a little
slower. Select this item to print on
Prepunched, Preprint and Letterhead.
Give the job speed top priority and
disregard the paper orientation. Select this
item when paper orientation is not
important.
Paper Finished
Paper Finished
Description
Cassette
Cassette
1
Press the System Menu key.
2
Press [Common Settings], [Next] of
Paper Settings, [
Paper Action.
3
Select [Adjust Print Direction] or [Speed Priority].
4
Press [OK].
Multi Purpose Tray
Multi Purpose Tray
Original /
] and then [Change] of Special
OPERATION GUIDE