Kyocera TASKalfa 250ci Operation Manual page 327

Detailed Adjustment
A total of 5 color pattern pages (No. 1 to 5) are printed during detailed adjustment. As with normal adjustment
(page 8-62), the printed color patterns are read sequentially during detailed adjustment.
Use the procedure below to carry out detailed adjustment.
OPERATION GUIDE
Default Setting (System Menu)
4
As shown in the illustration, place the printed side
down on the platen with the three black boxes
aligned to the top.
5
Press [Execute]. The color pattern is read and
adjustment begins.
6
The second color pattern is output.
Check that the number "2" (to "3") is printed at the
bottom of the color pattern and repeat steps 4 to 6
twice to read color patterns 2 and 3 in sequence.
7
Press [OK] in the adjustment end confirmation
screen.
1
Press the System Menu key.
2
Press [ ], [Adjustment/Maintenance], [
then [Next] of Gray Adjustment.
3
Press [Detail].
4
Press [Execute]. A color pattern is printed.
Check that the number "1" is printed at the bottom
of the color pattern.
5
As shown in the illustration, place the printed side
down on the platen with the three black boxes
aligned to the top.
6
Press [Execute]. The color pattern is read and
adjustment begins.
7
The second color pattern is printed.
Check that the number "2" (to "5") is printed at the
bottom of the color pattern and repeat steps 5 to 7
four times to read color patterns 2, 3, 4 and 5 in
sequence.
8
Press [OK] in the adjustment end confirmation
screen.
8
] and
8-63