Adjusting Density - Kyocera TASKalfa 250ci Operation Manual

Basic Operation

Adjusting Density

Use this procedure to adjust the density when copying.
Density Adjustment Option
Manual
Auto
NOTE:
You may choose Auto mode as the default setting (refer to Density on page 8-24).
The procedure for adjusting the density of copies is explained below.
Ready to copy.
Density
Auto
Place original.
Lighter
-3 -2
Original : ---
Zoom : 100%
-2.5
Paper : ---
Preview
Add Shortcut
Status
3-14
Copies
Darker
Normal
-1 0 +1 +2 +3
-1.5 -0.5 +0.5 +1.5 +2.5
Cancel OK
10/10/2008
Description
Adjust density using 7 or 13 levels.
Optimum density is selected according
to the density of the original.
1
Press the Copy key.
2
Place the originals on the platen.
3
Set the original on the platen and press [Color/
Image Quality] -> [Density].
4
Adjust density manually pressing [-3] (Lighter) to
[+3] (Darker). You can change the density level [-3]
(Lighter) to [+3] (Darker) in half-steps.
To change density adjustment from Manual to Auto,
press [Auto].
10:10
5
Press [OK].
6
Press the Start key. Copying begins.
OPERATION GUIDE