Kyocera TASKalfa 250ci Operation Manual page 285

Original Image
Set the default original document type. The available default settings are shown below.
Text+Photo
Photo
Printed Photo
Text
Map
for OCR
Printed Document
Use the procedure below to select the default quality setting for originals.
Scan Resolution
Select the default scanning resolution. The options are 600x600dpi, 400x400dpi Ultra Fine, 300x300dpi,
200x400dpi Super Fine, 200x200dpi Fine, 200x100dpi Normal.
Use the procedure below to select the default resolution setting.
OPERATION GUIDE
Item
Text and photos together.
For photos taken with a camera.
For photos printed in magazines, etc.
Only text, no photos.
For maps, etc.
Image quality suitable for OCR software.
For documents printed from this machine.
Default Setting (System Menu)
Use the procedure below to select the default
quality setting for originals.
4
Press [OK].
Description
1
Press the System Menu key.
2
Press [Common Settings], [
Defaults and then [Change] of Original Image.
3
Select the [Text+Photo], [Photo], [Printed Photo],
[Text], [Map], [for OCR] or [Printed Document] as
the default.
4
Press [OK].
1
Press the System Menu key.
2
Press [Common Settings], [
Defaults and then [Change] of Scan Resolution.
3
Select the default resolution.
4
Press [OK].
8
], [Next] of Function
], [Next] of Function
8-21