Kyocera TASKalfa 250ci Operation Manual page 98

Basic Operation
Use the procedure below to produce stapled copies.
Ready to copy.
Staple/Punch
Staple
Off
Place original.
Punch
Original : ---
Off
Zoom : 100%
---
Paper :
Preview
Add Shortcut
Status
3-26
Copies
Top 2 staples
Left Top
Top 2 staples
Right Right
2 staples Bind
Left and Fold
2 holes 3 holes
Left Left
Top Edge Top
2 holes 3 holes
Top Top
Original
2 holes 3 holes
Orientation
Right Right
Cancel OK
10/10/2008
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Org./Paper/Finishing] and then [Staple/
Punch].
4
Select the staple position.
NOTE:
To use saddle stitching, press [Bind and Fold].
When placing originals, be sure to place the cover
page at the bottom. For more information on saddle
stitching, refer to Booklet from Sheets on page 4-29.
10:10
5
Press [Original Orientation] to choose orientation of
the originals, either [Top Edge Top] or [Top Edge
Left]. Then press [OK].
6
Press [OK].
7
Press the Start key. Copying begins.
OPERATION GUIDE