Adjustment/Maintenance - Kyocera ECOSYS M5526cdw Operation Manual

Setup and Registration (System Menu) > System Menu

Adjustment/Maintenance

[System Menu/Counter] key > [Adjustment/Maintenance]
Adjust printing quality and conduct machine maintenance.
Item
Density Adjustment
Copy
Send/Box
Contrast
Copy
Send/Box
Correcting Black Line
Display Brightness
Color Registration
Drum Refresh
Calibration
Laser Scanner Cleaning
Service Setting
Adjust density.
Adjust copy density.
Value: -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
Adjust scan density when sending or storing the data in Document Box.
Value: -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
You can increase or decrease the overall contrast.
Increases or decreases the overall contrast of copies.
Value: -3 (Lower), -2, -1, 0 (Normal), +1, +2, +3 (Higher)
Increases or decreases the overall contrast when documents are sent or saved in a document
box.
Value: -3 (Lower), -2, -1, 0 (Normal), +1, +2, +3 (Higher)
Correct fine lines (streaks caused by contamination), which may appear on the image, when
the document processor is used.
Value: Off, On
Set the brightness of the touch panel.
Value: 1 (Darker), 2, 3, 4, 5 (Lighter)
When first installing the machine or moving it to a new location, color drift during printing may
occur. Use this function to correct the color position of each of cyan, magenta and yellow to
resolve color drift.
Color Registration Procedure (page 10-29)
Remove image blur and white dots from the printout. It takes about 2 minutes. The time
required may vary depending on the operating environment and this process may take time.
Drum Refresh (page 10-34)
NOTE
Drum Refresh cannot be performed while printing. Execute Drum Refresh after the printing is
done.
Adjust color drift or hue of printed image in the most appropriate color.
Calibration (page 10-34)
Remove vertical white lines from the printout.
Laser Scanner Cleaning (page 10-34)
Settings for machine maintenance and inspection. This menu is primarily used by service
technicians to perform maintenance.
8-41
Description