Form Overlay - Kyocera TASKalfa 250ci Operation Manual

Form Overlay

Forms
Follow the steps as below for form overlay.
Ready to copy.

Form Overlay

Density
Off
Select
Place original.
Stored Form
Scan
New Form
: ---
Original
Zoom : 100%
Paper : ---
Preview
Add Shortcut
Status
Ready to copy.
Form Overlay - Select Form
Document Box
Box Name
Form for Form Overlay
Custom Box
Status
OPERATION GUIDE
Original Copy
Copies
(10 - 100)
0
%
Select
Form
Cancel OK
10/10/2008 10:10
Copies
1
Up
Detail
1/1
Preview
Open
Cancel OK
10/10/2008 10:10
Copy the original images onto the form. Once you scan
and register the form, the form is overlaid onto the
original. You can also use a form that is already
registered in the machine's memory.
NOTE:
To register a form in advance, refer to Form for
Form Overlay Box on page 6-18 for details.
1
Press the Copy key.
2
Press [Layout/Edit] and then [Form Overlay].
3
Press [Scan New Form] to use the first page of
originals as a form.
NOTE:
Press [+] or [–] in [Density] to adjust the
density of the form. Choose from ten levels in 10%
increments.
To use the forms already registered, press [Select
Stored Form]. Press [Select Form] to display the
document boxes that store documents which can
be used as a form. Select the desired form from the
list and press [OK].
NOTE:
To return to a higher level folder, press [Up].
4
Press [OK].
5
Place the originals.
Place the original for the form on top of the other
originals. When using the optional document
processor, the first page of the originals should be
placed on the top.
6
Press the Start key to start copying.
Copying Functions
4
4-33