Editing And Deleting Programs - Kyocera TASKalfa 250ci Operation Manual

Copying Functions

Editing and Deleting Programs

You can change program number and program name, or delete program.
Use the procedure below to edit or delete a program.
4-56
3
Place the originals and press the Start key.
Copying is performed according to the registered
program.
1
Press the Program key.
2
Press [Edit] and press the key(s) corresponding to
the program number (01 to 50) to change or delete.
3
To edit a program, use the procedure for registering
a program and press [Change]. Then change the
program number and program name and press
[Register]. Choose [Yes] in the confirmation screen
to change the program.
To delete the program, press [Delete this Program].
Choose [Yes] in the confirmation screen to finally
delete the program.
OPERATION GUIDE