Kyocera TASKalfa 250ci Operation Manual page 303

Send - Original Size
Register Original Size function on the Quick Setup screen.
Off
Key 1 Key 2 Key 3
Key 4 Key 5 Key 6
Status
Color Type
Set the color type when you send color documents. The table below shows the available settings.
RGB
sRGB
Selecting RGB displays the color profile values set on the machine.
Use the procedure below to set the color type.
Setting the Default Send Screen
Use this procedure to set the default screen displayed when you press the Send key.
The table below shows the available settings.
Destination
Address Book
Use the procedure below to set the default send screen.
OPERATION GUIDE
Cancel OK
10/10/2008 10:10
Item
–
Allows you to match the color space for
machines that support sRGB.
Item
Displays the destination screen when the
Send key is pressed (screen for sending).
Displays the address book when the Send
key is pressed
Default Setting (System Menu)
4
Select a key (1-6) allocated on the Quick Setup
Registration screen. Press [Off] to delete a key
from the Quick Setup.
5
Press [OK]. If you overwrite the setting, a
confirmation screen appears. Press [Yes].
Description
1
Press the System Menu key.
2
Press [Send] and then [Change] of Color Type.
3
Select [RGB] or [sRGB].
4
Press [OK].
Detail
8
8-39