Kyocera TASKalfa 250ci Operation Manual page 425

500ci/400ci/300ci/250ci operation guide rev-1
Hide thumbs Also See for TASKalfa 250ci:
Table of Contents

Advertisement

Item
LDAP Security
*1
If using Active Directory of Windows, the server name may be same as the server name entered in the
network authentication.
*2
If using Active Directory of Windows, displayName of Attribute may be used as Name 1.
*3
Name 2 can be left out. When you assign displayName in Name 1 and department in Name 2, and if the
value of displayName is "Mike Smith" and the value of department is "Sales" in Active Directory of Windows,
the user name appears as Mike Smith Sales.
*4
If using Active Directory of Windows, mail of Attribute may be used as E-mail Address.
User Login/Job Accounting - Network User Property
Get the network user information.
LDAP Server Information:
Off
Server Name
192.181.11.11
On
Port:
389
Acquisition of User Information:
Name 1
displayName
Name 2
E-mail Address
mail
Status
OPERATION GUIDE
Select the type of encryption according to the type of security employed by the
LDAP server.
# Keys
30
sec.
Search
Timeout
Off
LDAP
Security
Cancel
OK
10/10/2008
10:10
Description
1
Press the System Menu key.
2
Press [User Login/Job Accounting].
3
If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to login with administrator
privileges. Refer to Adding a User on page 11-4 for
the default login user name and password.
4
Press [Next] of User Login Setting, [Change] of
Obtain NW User Property.
5
Press [On].
6
Press [Server Name].
7
Enter the LDAP server name or the IP address and
press [OK].
8
Press [# keys] to enter the LDAP port number using
the numeric keys.
9
Press [Name 1].
10
Enter the LDAP Attribute to obtain the user name to
be displayed and press [OK].
11
Follow steps 9 and 10 above to set Name 2.
12
Press [E-mail Address].
13
Enter the LDAP Attribute to obtain the e-mail
address and press [OK].
14
Press [Search Timeout] to set the amount of time to
wait before time-out.
15
Press [+], [-] or the numeric keys to enter the time.
Management
11
11-13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Taskalfa 300ciTaskalfa 400ciTaskalfa 500ci

Table of Contents