Kyocera TASKalfa 250ci Operation Manual page 416

Management
Logout
Adding a User
This adds a new user. You can add Up to 1,000 users (including the default login user name). The table below
explains the user information to be registered.
User Name*
Login User
Name*
Login
Password*
Access Level*
11-4
Item
Enter the name displayed on the user list (up to 32
characters).
Enter the login user name to login (up to 64
characters). The same login user name cannot be
registered.
Enter the password to login (up to 64 characters).
Select Administrator or User for user access
privileges.
3
Press [Login Password].
Press [# keys] to enter the login data using the
numeric keys.
4
Enter the login password and press [OK].
NOTE:
If Job Accounting is enabled, you can browse
the number of pages printed and the number of pages
scanned by pressing [Counter Check].
If Network Authentication is selected as the user
authentication method, either Local or Network can be
selected as the authentication destination.
5
Check the login user name and password are
correct, and press [Login].
To log out the machine, press the Logout key to return
to the login user name/login password entry screen.
Auto Logout
Logout is automatically executed in the following cases:
• When the Power key is pressed to enter the sleep
mode
• When auto sleep is activated
• When auto panel reset is activated
• When auto low power mode is activated
• When low power mode is activated by pressing the
Energy Saver key.
Description
OPERATION GUIDE