Network Setup
The following network settings are available.
•
Checking Host Name ...8-89
•
TCP/IP (IPv4) Setup ...8-89
•
TCP/IP (IPv6) Setup ...8-90
•
Protocol Detail ...8-92
•
NetWare Setup ...8-93
•
AppleTalk Setup ...8-94
•
WSD Scan Setup ...8-95
•
WSD Print Setup ...8-95
•
Secure Protocol ...8-96
•
IPSec Setting ...8-98
•
LAN Interface Setup ...8-98
Checking Host Name
Check the host name of the machine. Use the procedure below.
TCP/IP (IPv4) Setup
Set up TCP/IP to connect to the Windows network.
Refer to TCP/IP (IPv4) Setup (by Entering IP Addresses) on page 2-10 about the procedures.
OPERATION GUIDE
Default Setting (System Menu)
1
Press the System Menu key.
2
Press [System], [Next] of Network. Check the host
name displayed under Host Name.
8
8-89