Kyocera TASKalfa 250ci Operation Manual page 395

Error
Error Message
Code
2103 Failed to send the e-mail.
Failed to send via FTP.
2202
Failed to send i-FAX.
2201 Failed to send the e-mail.
Failed to send via FTP.
Failed to send via SMB.
Failed to send i-FAX.
2203 Failed to send via FTP.
Failed to send via SMB.
2231 Failed to send via FTP.
2204 Failed to send the e-mail.
Failed to send i-FAX.
3101 Failed to send the e-mail.
Failed to send i-FAX.
Failed to send via FTP.
3201 Failed to send the e-mail.
Failed to send i-FAX.
5101 –
5102
5103
5104
7102
720f
9181 –
OPERATION GUIDE
Corrective Actions
Check the network.
- The network cable is connected.
- The hub is not operating properly.
- The server is not operating properly.
Check the e-mail size limit of the
SMTP settings on the COMMAND
CENTER.
Check the authentication methods of
both the sender and the recipient.
Check the network.
- The network cable is connected.
- The hub is not operating properly.
- The server is not operating properly.
Check the SMTP user authentication
method of the recipient.
Turn the main power switch off and
back on. If this error occurs several
times, make a note of the displayed
error code and contact your service
representative.
The scanned original exceeds the
acceptable number of pages of 999.
Send the excess pages separately.
Troubleshooting
Reference Page
–
2-14
–
–
–
–
10-13
10