Enter Document Name/File Name - Kyocera TASKalfa 250ci Operation Manual

Sending Functions

Enter Document Name/File Name

This setting allows you to assign a document name to scanned images. You can specify a default for the
document name.
Use the procedure below to assign names to scanned documents that you are sending.
Ready to send.
Place original.
File Name Entry
Add a file name.
Additional information such as Job No.
and Date and Time can also be set.
File Name
doc
Additional Info
& [ Date and Time
Job No.
Add Shortcut
Status
5-28
Destination
]
Date and Time
Cancel OK
10/10/2008
1
Press the Send key.
2
Place the originals on the platen.
3
Press [Advanced Setup] and then [File Name
Entry].
4
Press [File Name].
10:10
5
Enter the document name, and press [OK].
NOTE:
Up to 32 characters can be entered for the
document name.
6
Press [Job No.] to enter the job No., and [Date and
Time] to enter the date and time.
7
Press [OK].
8
Specify the destination, and press the Start key to
start sending.
OPERATION GUIDE