Color / Grayscale / Black And White Selection - Kyocera TASKalfa 250ci Operation Manual

Sending Functions

Color / Grayscale / Black and White Selection

This feature allows you to select the color mode used for scanning when sending images. You can select from
Auto(Color/Gray), Auto(Color/B & W), Full Color, Grayscale or Black & White.
Use the procedure below to select the color mode when sending scanned images.
Ready to send.
Place original.
Color Selection
Select scanning color.
Select [Auto Color] to automatically send color originals
in full color and black & white originals in black & white.
Place original.
Auto Color
(Color/Gray)
Original : ---
Zoom : 100%
Paper : ---
Full Color
Preview
Add Shortcut
Status
5-24
Destination
Auto Color
(Color/B & W)
Grayscale Black & White
Cancel OK
10/10/2008 10:10
1
Press the Send key.
2
Place the originals on the platen.
3
Press [Color/Image Quality] and then [Color
Selection].
4
Select the color mode to be used for scanning.
5
Press [OK].
6
Specify the destination, and press the Start key to
start sending.
OPERATION GUIDE