Low Power Timer - Kyocera TASKalfa 250ci Operation Manual

Default Setting (System Menu)
Panel Reset Timer
If you select [On] for Auto Panel Reset, set the amount of time to wait before Auto Panel Reset. Options are
between 5 and 495 seconds (every five seconds).
NOTE:
If you select [Off] for Auto Panel Reset, the time display does not appear.
Use the procedure below to set the reset time.

Low Power Timer

You can specify the amount of time to wait before Low Power Mode.
Specify a value from 1 - 240 minutes (1 minute increments).
For more information on Low Power Mode, refer to the Low Power Mode and Auto Low Power Mode on page
3-4.
Use the procedure below to set the Low Power Mode.
8-68
3
Press [Off] or [On].
4
Press [OK].
1
Press the System Menu key.
2
Press [ ], [Date/Timer] and then [Change] of
Panel Reset Timer.
3
Press [+] or [–] to enter the time until Auto Panel
Reset is turned on.
You cannot use the number keypad to enter this
value.
4
Press [OK].
1
Press the System Menu key.
2
Press [ ], [Date/Timer] and then [Low Power
Timer].
3
Press [+],[–] or the numeric keys to enter the time
until Low Power Mode is turned on.
4
Press [OK].
OPERATION GUIDE