Kyocera TASKalfa 250ci Operation Manual page 357

Item
IPP
IPP over SSL
Raw Port
Y
* : The machine must be restarted after the setting is changed.
N
: The machine does not need to be restarted after the setting is changed.
Use the procedure below.
The following procedure is an example for specifying the SMTP (E-mail TX) settings.
NetWare Setup
Select the NetWare network connection. After that, select frame types for NetWare network from Auto,
Ethernet-II, 802.3, 802.2, or SNAP. The default settings are "On, Frame Type: Auto".
Use the procedure below.
OPERATION GUIDE
Description
Select whether or not to
communicate using IPP. When
selecting [On], set the IPP default
Port Number. Use the IPP default
port 631.
Select whether or not to use IPP
over SSL.
SSL must be set to [On] in SSL
Setup on page 8-96.
Select whether or not to receive
documents using Raw Port.
Default Setting (System Menu)
Default
Setting
Off
Port:631
Off
On
1
Press the System Menu key.
2
Press [System] and then [Next] of Network to
display the network settings screen.
3
Display the item you want to set and press
[Change] for that item.
In this example, press [Change] of SMTP (E-mail
TX).
4
Press [On] or [Off].
5
Press [OK].
6
After changing the setting, restart the system or
turn the machine OFF and then ON again.
For detailed information on restarting the system,
refer to Restarting the System on page 8-88.
1
Press the System Menu key.
2
Press [System], [Next] of Network and then
[Change] of NetWare.
Restarting the
System*
Y
Y
Y
8-93
8