(such as WebTools) to a product with the most recent version of FOS. Some older versions of FOS
do not fully support newer hardware models, and problems may arise when configuring settings
through these older products.
NOTE:
Do not configure zoning through a switch operating with FOS 3.x in a fabric that has products
operating with later versions of FOS.
Prerequisites
Table 1
lists the supported FOS firmware versions. HP recommends using the latest supported firmware
versions to get the greatest benefit from the SAN.
For a list of retired products, see the HP website:
http://www.hp.com
IMPORTANT:
The FOS versions listed in the Earliest compatible version column in
Table 1
are the earliest versions
supported by HP for connection to switches running FOS 6.3.0b at the time of the FOS 6.3.0b release.
HP StorageWorks FOS 6.3.0b Release Notes
13