Storage System/Dad Selection List Panel - HP StorageWorks P9000 Reference Manual
Business continuity manager software reference guide
Hide thumbs
Also See for StorageWorks P9000:
- Manual (333 pages) ,
- User manual (322 pages) ,
- Reference manual (236 pages)
Table of Contents
Advertisement
Storage System/DAD Selection List Panel
If s is specified for AC in the Add Route Entry panel, the Insert Route Entry panel, or the Edit Route
Entry panel, then the Storage System/DAD Selection List panel is displayed. The Storage
System/DAD Selection List panel displays storage system (DKC) serial numbers and DAD IDs that
can be specified for the entry.
Figure 45 (page 56)
Figure 45 Storage System/DAD Selection List Panel
Table 37 (page 56)
Table 37 Contents of the Storage System/DAD Selection List Panel
Item
Route List Id
Route DADID
AC
S/N
Device Address Domain
The following list describes the relationship between the contents of the DKC/DAD Selection List
panel and the input status of the input fields for the Add Route Entry, Insert Route Entry, and Edit
Route Entry panels:
If s is specified for the AC of S/N after a DAD ID has been specified for Device Address
Domain, then a list of the S/Ns within the DAD ID for Device Address Domain is displayed in
the Storage System/DAD Selection List panel.
If s is specified for the AC of Device Address Domain after a storage system (DKC) serial
number has been specified for S/N, then a list of the DAD IDs within the storage system for
S/N is displayed in the Storage System/DAD Selection List panel. Note that the DAD ID
specified for an NG scan is not displayed.
If s is specified for the AC of Device Number when Device Address Domain, S/N, and Device
Number are blank, then the Storage System/DAD Selection List panel is displayed. If a DAD
ID or storage system serial number is selected in the Storage System/DAD Selection List panel,
56
ISPF Panels
shows the Storage System/DAD Selection List panel.
describes the items in the Storage System/DAD Selection List panel.
Description
Route list ID selected in the Entire Route Information panel
DAD ID to be defined in the route list
If blank, the DAD ID selected in this panel will be defined in the route list.
Specify an action.
s: Select a DAD ID or storage system serial number for the DAD ID or storage
system serial number selected in the Add Route Entry panel, Insert Route Entry
panel, or Edit Route Entry panel.
Specifiable storage system (DKC) serial numbers
Specifiable DAD IDs
Advertisement
Table of Contents
