HP StorageWorks P9000 Reference Manual page 253
Business continuity manager software reference guide
Hide thumbs
Also See for StorageWorks P9000:
- Manual (333 pages) ,
- User manual (322 pages) ,
- Reference manual (236 pages)
Table of Contents
Advertisement
You must use the CAJ ATTIME suspend function for a copy group in which the P-VOLs are Non
Gen'ed volumes. If you do not use the CAJ ATTIME suspend function, an I/O error will occur.
For a copy group to which the NORMAL ATTIME suspend time has been set, do not set the CAJ
ATTIME suspend time. To set the CAJ ATTIME suspend time for a copy group to which the NORMAL
ATTIME suspend time has been set, cancel the setting of the NORMAL ATTIME suspend time without
using the Remote DKC Control Function, and then set the CAJ ATTIME suspend time.
This setting is reset by P/S ON/OFF on the Primary storage system.
The format of timevalue is as follows:
YYYYMMDD:HHMMSS:mmmm:ss, {LOCAL | GMT}
YYYY ~ <numeric characters> ((1970 to 2042))
Specify the year.
MM ~ <numeric characters> ((01 to 12))
Specify the month.
DD ~ <numeric characters> ((01 to 31))
Specify the date.
HH ~ <numeric characters> ((00 to 23))
Specify the hour.
MM ~ <numeric characters> ((00 to 59))
Specify the minute.
SS ~ <numeric characters> ((00 to 59))
Specify the second.
mmmm ~ <numeric characters> ((0000 to 9999))
Specify an offset value from the time specified in YYYYMMDD:HHMMSS in minute.
ss ~ <numeric characters> ((00 to 99))
Specify an offset value from the time specified in YYYYMMDD:HHMMSS in second.
LOCAL
This value means that the specified time is in local time.
GMT
This value means that the specified time is in GMT.
NOTE:
When you specify the time using ATTIME parameter, note the following:
Do not specify a time value earlier than the command execution time.
The processing might be suspended when the specified time is reached during command
execution. Take the command execution time into consideration when you specify the time.
Do not specify a time value larger than the command execution time plus 65,536 minutes.
To check the specified time in another way, see the ISPF log or the execution result of the
script.
Do not specify a time later than 2042/9/17 23:53:47 GMT.
If the host on which the command is executed is different from the host that issues an I/O to
the storage system, synchronize the time between the hosts.
ATOPT({NORMAL|CAJ[({STEADY|QUICK})]})
Applies to Business Copy for Mainframe.
Command details 253
Advertisement
Table of Contents
