HP StorageWorks P9000 Reference Manual page 231
Business continuity manager software reference guide
Hide thumbs
Also See for StorageWorks P9000:
- Manual (333 pages) ,
- User manual (322 pages) ,
- Reference manual (236 pages)
Table of Contents
Advertisement
SSN(serial-number) ~ <from 5 to 12 alphanumeric characters>
To obtain information on an inter-DKC logical path, specify the serial number of the secondary
storage system for the inter-DKC logical path you want to obtain. You can obtain information on
inter-DKC logical paths whose primary storage system to which the volume specified by the DEVN
parameter or the SN, CU, and CCA parameters belongs, and whose secondary storage system is
one that has the serial number specified by the SSN parameter. If this parameter is omitted, even
if the PATH parameter is specified, the command will only acquire inter-CU logical path information
(without acquiring inter-DKC logical path information).
SMODEL({USP|USPV|VSP})
To obtain information on an inter-DKC logical path, specify the model of the secondary storage
system for the inter-DKC logical path you want to obtain. If this parameter is omitted, USP is
assumed.
USP
Specify this option when the model of the secondary storage system for the inter-DKC logical path
you want to obtain is HP StorageWorks XP12000/XP10000 Disk Array.
USPV
Specify this option when the model of the secondary storage system for the inter-DKC logical path
you want to obtain is HP StorageWorks XP24000/XP20000 Disk Array.
VSP
Specify this option when the model of the secondary storage system for the inter-disk controller
logical path you want to obtain is VSP.
Return Codes
Table 125 (page 231)
Table 125 YKQRYDEV Command Return Code List
Return Code
Meaning
-4095 to -4040
The command terminated abnormally, possibly because the user SVC routine has
not been included properly.
The module cannot be loaded. Possible causes are as follows:
-3
An interruption occurred during execution.
-1
The command completed normally.
0
32
An error occurred while a REXX variable was being written.
40
Terminating due to processing errors.
44
Terminating due to invalid parameters.
48
128
The command terminated abnormally. The user does not have permission to execute
this command.
lists the return codes to be returned when the YKQRYDEV command terminates.
The library dataset has not been linked.
The module is protected by the RACF program control function.
I/O errors were encountered.
A change in an I/O configuration definition was detected.
Command details 231
Advertisement
Table of Contents
