Ykwatch Command - HP StorageWorks P9000 Reference Manual

Table 138 YKSUSPND Command Return Code List
Return Code
-4095 to -4040
-3
-1
0
4
32
36
40
44
48
128

YKWATCH Command

Applies to Business Copy for Mainframe, Continuous Access Synchronous for Mainframe, Continuous
Access Synchronous for Mainframe with the HyperSwap attribute, and Continuous Access
Asynchronous for Mainframe.
Format
YKWATCH
PREFIX(prefix)
1
GROUP(copy-group-id)
1
GOTO({DUPLEX|SUSPEND|SIMPLEX})
1
TIMEOUT(timeout-value)
1
DAD(dad-id)
1
[ {USER({user-id|*})|OPERATOR(route-code)|CN({console-id|console-nameINTERNAL})}]
1
Function
This is a TSO/E command that is called from within an REXX script.
Meaning
The command terminated abnormally, possibly because the user SVC routine has
not been included properly.
The module cannot be loaded. Possible causes are as follows:
The library dataset has not been linked.
The module is protected by the RACF program control function.
An interruption occurred during execution.
The command completed normally.
Since a volume with an invalid status was found in the copy group, processing for
the volume will be skipped.
I/O errors were encountered.
A change in an I/O configuration definition was detected.
Invalid or missing data in a REXX variable.
An error occurred while a REXX variable was being written.
Terminating due to invalid processing.
Terminating due to invalid parameters. This return code appears, for example, in
the following cases:
When the ATTIME parameter and DEVN parameter are both specified.
When the ATTIME parameter and VOLUNIT parameter are both specified.
When a suspend that changes the copy direction for a CAA or CAJ after
RESYNC is performed with the VOLUNIT or DEVN parameter specified.
When the copy pair corresponding to the device number specified with the
DEVN parameter is not found.
When the VOLUNIT parameter or DEVN parameter, and the PURGE parameter
are specified for a CAJ at the same time.
For a CAA, when an attempt to cancel the ATTIME suspend time for the remote
storage system was made.
The command terminated abnormally. The user does not have permission to execute
this command.
Command details 259