Ykqrypth Command; Ykqrypth Command - HP StorageWorks P9000 Reference Manual

YKQRYPTH Command

Applies to PTH.
Format
YKQRYPTH
STEM(stem-name-1)
1
MSG(stem-name-2)
1
[ PSN(storage system-serial-number)[
1
[ SSN(storage system-serial-number)[
1
[ {FORWARD|REVERSE}]
1
[ RESTRUCT]
1
[ TYPE({CU|DKC})]
1
Function
This command is a TSO/E command called from REXX scripts.
This command acquires the status of all physical paths allocated to all or some of the logical paths
identified in the path set that is stored in the path set structure with the prefix specified by the STEM
parameter.
Parameters
STEM(stem-name- 1 ) ~ <REXX prefix of 64 or fewer characters>
Specify the prefix of the name of the path set structure that stores information about the logical
path whose status you want to obtain. Specify the same character string as the one specified in
the STEM parameter of the YKLOAD command that loaded the corresponding logical path. You
must also include a trailing period character.
MSG(stem-name-2) ~ <REXX prefix of 64 or fewer characters>
Specify an optional prefix for the name of the message structure used to store the messages to be
generated by this command. You must also include a trailing period character.
The message structure is initialized when the CLI command with the same name as the MSG
parameter is specified.
PSN(storage system-serial-number) ~ <from 5 to 12 alphanumeric characters>
If this parameter is specified, for each logical path within the path set stored in the path set structure
specified for the STEM parameter, inter-CU logical paths will be acquired in all cases where the
paths treat CUs within storage systems (that have the serial number specified by this parameter)
as MCUs, and inter-DKC logical paths will be acquired in all cases where the paths treat the storage
system (that has the serial number specified by this parameter) as the primary storage system.
If neither this parameter nor any other parameters are specified, the command obtains the status
of all logical paths.
PCU(cu-number) ~ <2-digit hexadecimal number>
If this parameter is specified, out of the logical paths within the path set stored in the path set
structure specified for the STEM parameter, inter-CU logical paths will be acquired in all cases
where the CU number of the MCU matches the value specified for this parameter. Inter-DKC logical
paths are not affected by this parameter.
If neither this parameter nor any other parameters are specified, the command acquires all inter-CU
logical paths.
232 CLI Commands
PCU(cu-number)]
1
SCU(cu-number)]
1