Flashcopy Information Structure - HP StorageWorks P9000 Reference Manual

Table 152 Path Set Structure (continued)
REXX variables
S2P
1 These variables are valid when the n.type value is DKC.
2 These variables are valid when the n.type value is CU.
3 When the YKLOAD command is executed, values are loaded from the configuration file and set as REXX variables.
When the YKQRYPTH command is executed, REXX variables are updated.

FlashCopy Information Structure

Table 153 (page 348)
FlashCopy information structure is stem-name-specified-in-STEM-parameter. Each REXX variable is
preceded by a period (.).
Table 153 FlashCopy Information Structure
REXX variables
1
Info
Source
Target
348 Data Objects
Setting 0
0
3
n
Status
Pri port
Sec port
Setting 0
shows the FlashCopy information structure. The prefix for the name of the
Description
Existence of FlashCopy information structure (Valid)
Hardware information
State0
Hardware information
State1
Hardware information
State2
Hardware information
State3
Hardware information
State4
Hardware information
State5
Hardware information
State6
Hardware information
State7
Existence of a FlashCopy relationship:
State0
0: No
1: Yes (copying)
Existence of a FlashCopy in COPY mode relationship:
State1
0: No
1: Yes (Copying in COPY mode)
Existence of a FlashCopy in NOCOPY mode relationship:
State2
0: No (No FlashCopy in NOCOPY mode)
1: Yes (FlashCopy in NOCOPY mode exists)
Description
The number of physical paths from the primary site to the
secondary site set in the storage system (0 to 8)
The number of defined physical paths from the secondary
site to the primary site (0 to 8)
Status of a logical path
The target port number of the primary site of the logical
path (on the storage system indicated by
Pri.SerialNum)
The initiator port number of the secondary site of the
logical path (on the storage system indicated by
Sec.SerialNum)
The number of physical paths from the secondary site to
the primary site set in the storage system (0 to 8)