Figure 61 Panel Transition for the Copy Group Selection List Panel (Browse Copy Group Information)
#: Pressing the F6=Sort key sorts items on the panel.
Figure 62 (page 71)
shows the panel transition when e is specified for AC in the Copy Group
Selection List panel.
Figure 62 Panel Transition from the Copy Group Selection List Panel (Update Copy Group)
#1: The displayed panel changes if the specification for whether to make the copy group a CG
container (Use Container check box) is changed.
#2: After the Copy Group Pair Detail panel is displayed, the Setting C/T ID Attributes panel is
displayed on that panel.
#3: Pressing the F6=Sort key sorts items on the panel.
#4: If the numbers of P-VOLs and S-VOLs that are specified are not the same, pressing Enter does
not change the panel that is currently displayed.
Figure 63 (page 72)
shows the panel when e is specified for AC in the Copy Group Selection List
panel.
The Copy Group Selection List panel is shown in
Figure 63 (page
72).
Discover/Define Configuration Panel (Configuration File Definition)
71