Import Sms Storage Group Panel - HP StorageWorks P9000 Reference Manual

Table 60 Contents of the Pair Selection List (Primary) Panel
Item
1
Devn
1
Volser
AC
Prompts
Volser
Devn
SN
SSID
CU
CCA
1 The procedure to specify the range is the same as for specifying the pattern parameter for the SELECT command. For
details about how to specify the pattern parameter for the SELECT command, see
(page 11).
If the number of P-VOL devices selected does not match the number of S-VOL devices, this panel
remains ready to accept device selections until the number matches the number of S-VOL devices.
Once the number of selected devices matches the number of S-VOL devices, display transits to the
Copy Group Pair Detail panel.
You can use the SELECT command in the Pair Selection List (Primary) panel. For details about how
to use the SELECT command, see
"Specifying fields for a condition of the SELECT command" (page 90)
the fields for a condition of the SELECT command:
Table 61 Specifying fields for a condition of the SELECT command
Name of field
DEVN
VOLSER
If you omit the field name, DEVN will be set as a default value.

Import SMS Storage Group Panel

If you press the F4=IprtSMS key in the Pair Selection List (Primary) panel, the Import SMS Storage
Group panel appears.
Figure 77 (page 91)
90 ISPF Panels
Description
If the copy pairs to be specified are indicated by device numbers, select this item, and then
specify the device number range for the copy pairs you want to select (as ascending
hexadecimal numbers).
If the copy pairs to be specified are indicated by volume serial numbers, select this item, and
then specify the volume serial number range for the copy pairs that you want to select (in
EBCDIC code order).
Specify s for devices joined in copy pairs. Copy pairs are joined in ascending order of device
number
Displays *In Config once a copy pair is joined (once the paired device has been
determined).
Displays *Imported if the device is imported from the SMS storage group.
Volume serial number
Device number
Storage system serial number
Storage subsytem number
CU number
The two leftmost digits indicate the device CCA (in hexadecimal)
The rightmost digit indicates whether the CCA is an external volume.
+: External volume
: Not an external volume
(blank): The volume attribute is unknown because it could not be acquired
"Command Line Commands" (page
Value in field
Device Number
Volume serial number
shows the Import SMS Storage Group Panel.
"Command Line Commands"
11).
lists how you can specify
Type
Hexadecimal
Character string