HP StorageWorks P9000 Reference Manual page 12
Business continuity manager software reference guide
Hide thumbs
Also See for StorageWorks P9000:
- Manual (333 pages) ,
- User manual (322 pages) ,
- Reference manual (236 pages)
Table of Contents
Advertisement
Table 1 SELECT Parameters
Parameter
field-name
pattern
action-name
Examples
To display the status of copy groups that begin with TCGRP (the default field name, CGID,
can be omitted), in the Manage Copy Groups panel, enter the following command:
SΔCGIDΔTCGRP*ΔQ
To load copy groups for which NOT LOADED is set to Status, in the Manage Copy Groups
panel, enter the following command:
SΔSTATUSΔNOT LOADEDΔL
To select the device for which VSN111 is set to Volser, in the Pair Selection List (Primary) panel,
enter the following command:
SΔVOLSERΔVSN111ΔS
To select the device for which F310 is set to Devn (the default field name, DEVN, can be
omitted), in the Pair Selection List (Primary) panel, enter the following command:
SΔDEVNΔF310ΔS
To select the devices for which F310 through F320 are set to Devn (the default field name,
DEVN, can be omitted), in the Pair Selection List (Primary) panel, enter the following command:
SΔDEVNΔ'F310':'F320'ΔS
12
ISPF Panels
Explanation
Specifies the name of a field in which a condition is specified.
For details about the field names that can be specified, see the explanation
for the applicable panel.
If field-name is omitted, the default field established for the applicable
panel is assumed.
Character string
Specifies either of the following values:
Value of a field
Part of a field value with the inclusion of an asterisk (*)
The asterisk (*) represents any character string of zero or more characters.
An asterisk (*) can be specified at the beginning or end of a character
string:
character-string*
*character-string
To specify a field value that contains spaces or commas (,), enclose the
specified field value in single quotation marks (').
Asterisk (*)
Used to select all rows in a list.
'value- 1 ':'value-2'
Specifies a range of field values.
This pattern can be used only for DEVN, PDEVN, SDEVN, and VOLSER
fields.
Specify such that value- 1 ≤ value-2, and enclose the values in single
quotation marks (').
Specifies one of the available actions.
A space can be specified for action-name. If a space is specified, the
previously specified action is cancelled.
Advertisement
Table of Contents
