HP StorageWorks P9000 Reference Manual page 342

Table 151 Device Information Structure (continued)
REXX variables
CAJ
342 Data Objects
SplitMode
Status
BCStatus
CAJStatus
ErrorCode
Time
Tout
Tout2
Trem
CTTime
1
Info
0
Description
Suspend mode used by the CAJ ATTIME suspend
function.
(This indicates whether secondary volumes
transitioning to the suspend status can be
accessed or updated.)
STEADY: Volumes can be accessed or
updated after the copy operation is completed.
QUICK: Volumes can be accessed or updated
even while the copy operation is in progress.
ATTIME suspend status
Notset: The ATTIME suspend time is not set.
PRESET: The ATTIME suspend time is set, but
suspend has not been performed.
SUSPEND (TIMESTAMP): Suspend was
performed because the ATTIME suspend time
elapsed.
SUSPEND (TIMEOUT): Suspend was
performed because a timeout occurred.
SUSPEND (NOIO): Suspend was performed
because no update journal was detected.
BC copy group status
WAITING: Suspend processing has not been
started.
SUSPENDING: Suspend processing is ongoing.
SUSPEND: Suspend processing ended
normally.
ERROR: Suspend processing ended
abnormally.
The status of the CAJ copy group when the BC
copy group is suspended.
DUPLEX: When suspend was performed, all
CAJ copy pairs were in DUPLEX status.
UNEXPECTED: When a suspend was
performed, some CAJ copy pairs were not in
DUPLEX status.
Error code (hexadecimal number: 0000-FFFF)
6
ATTIME suspend information (yyyymmdd
hh:mm:ss.nnnnnn)
Timeout value since the command is issued
(minutes)
Timeout value since the ATTIME suspend time
(minutes)
Time remaining until timeout (minutes)
6
Consistency time for the CAJ copy group at
suspension (yyyymmdd hh:mm:ss.nnnnnn)
Existence of copy pair information (Valid)
Number of CAJ copy pairs