text-2 ~ <string of 70 or fewer characters>
Use this parameter when you want to output a multi-line message. For this parameter, specify the
second line of the text that you want to output.
text-3 through text- 1 0 ~ <string of 70 or fewer characters>
Use these parameters when you want to output more than two lines for a message. The specification
method is the same as for the text-2 parameter.
NOTE:
For a multiline message, the message text can be output to a maximum of 10 lines.
Return codes
Table 140 (page 263)
terminates.
Table 140 YKWTOMSG Command Return Code List
Return code
0
1004
1008
1012
1016
2000
Other than above
CLI Command Coding Examples
Coding examples for each CLI command are stored in the sample library HPQYSAMT as sample
scripts.
Table 141 (page 263)
Table 141 List of Sample Scripts
Sample script name
YKDEMO01
YKDEMO02
lists the return codes to be returned when the YKWTOMSG command
Meaning
The command completed normally.
No type has been specified.
The specified type is invalid.
No text has been specified.
The specified text is invalid.
A system error occurred.
Refer to the return code of the WTO macro. For details, see the IBM documentation MVS
Programming: Assembler Services Reference.
lists the sample scripts stored in HPQYSAMT.
Overview
Uses the following CLI commands to demonstrate basic operations on copy
groups:
YKLOAD
YKMAKE
YKSUSPND
YKRESYNC
YKDELETE
YKQUERY
YKEWAIT
Uses the following CLI commands to demonstrate FlashCopy linkage:
YKFCSTAT
YKSLEEP
Command details 263