HP StorageWorks P9000 Reference Manual page 28

Table 10 Contents of the Set Defaults Panel (continued)
Item
Remote DKC Function
For these values, see .
Preset RouteListID
SEND Options
Timeout Hours
Timeout Minutes
Job Name Prefix
JCL JOB Statement
1 If one or more configuration files have already been created by using the Mainframe Agent YKP2A command, specify
a different prefix from that of any configuration file. To do this, use the command for Configuration File Prefix. If you
specify the same prefix, an error occurs in the Scan Copy Pair Inside Disk Array panel or Manage Copy Groups panel.
2 If you have already started the Business Continuity Manager agent with LOCK(PREFIX) specified, specify a prefix
that is different from the one Business Continuity Manager agent uses for Configuration File Prefix. If you specify the
same name, an error will occur.
3 For these values, see
Press F8=Forward to display the remaining items in the panel. The Set Defaults panel is displayed
as when F8=Forward is pressed.
28 ISPF Panels
Description
Use the following values to set the Remote DKC Control Function:
Y—Default to the Remote DKC Control Function.
N—Do not default to the Remote DKC Control Function.
3, 3
Specify ROUTE parameter value (the route list ID) for the YKLOAD command. Do
not use hyphens.
If Remote DKC Function is set to Y and Preset RouteListID is not specified, and
YKLOAD is executed in the Manage Copy Groups panel, then the LOAD Option
panel to query the route list ID is shown.
Specify options for the YKWATCH command and for the job that outputs the SMS
list.
Specify the JCL of the background job.
The specified value is used at the following times:
When w is entered in AC on the Manage Copy Groups panel and the
YKWATCH command is executing in the background
When using the Scan Copy Pair Inside Storage System panel to execute in
the background the copy group definition generation function for a PPRC
copy pair
"Executing YKLOAD" (page 110).