Cca Selection List For Edit Devn Panel - HP StorageWorks P9000 Reference Manual

scan does not display the command devices. If you exit the CU Selection List for Remote Storage
System panel by pressing F3=Exit, and enter e in AC in the Discover HP Storage System panel.
NOTSET is displayed in Information for the CU number to which the command device belongs.
Assign a dummy device number to the command device.
If the Scan Device Address Extent panel transitions to the CU Selection List for Remote Storage
System panel, you can return to the Scan Device Address Extent panel by pressing the F3=Exit key
in the CU Selection List for Remote Storage System panel.
If the Scan Remote Device Address Extent panel or the Discover HP Storage System panel transitions
to the CU Selection List for Remote Storage System panel, you can return to the Discover HP Storage
System panel by pressing the F3=Exit key in the Selection List for Remote Storage Array panel.

CCA Selection List for Edit devn Panel

If s is specified in AC in the CU Selection List for Remote Storage System panel, or if a dummy
device number is entered in the Edit Device Number for CU panel, and then Enter is pressed, the
CCA Selection List for Edit devn panel will be displayed. CCA Selection List for Edit devn panel
displays the dummy device number assigned to each volume detected in a remote scan or NG
scan.
Figure 23 (page 37)
Figure 23 CCA Selection List for Edit devn Panel
Table 17 (page 37)
Table 17 Contents of the CCA Selection List for Edit devn Panel
Item
Device Address Domain
Description
shows the CCA Selection List for Edit devn panel.
describes the items in the CCA Selection List for Edit devn panel.
Description
DAD ID to which a device belongs
Description of the storage system to which a device belongs
Discover/Define Configuration Panel (Configuration File Definition) 37