Sort Copy Group Pairs List Panel; Scan Copy Pair Inside Storage System Panel - HP StorageWorks P9000 Reference Manual

Sort Copy Group Pairs List Panel

When F6=Sort is pressed in the Copy Group Pair Detail panel, the Sort the Copy Group Pairs List
panel is displayed to specify the sort key.
Figure 81 (page 94)
Figure 81 Sort the Copy Group Pairs List Panel
In the Sort the Copy Group Pairs List panel, you can select the sorting order from the following
items.
Item
1. Primary Device Number
2. Primary Volume Serial Number
3. Secondary Device Number

Scan Copy Pair Inside Storage System Panel

When SCANPAIR is entered on the command line and the Enter key is pressed on the Copy Group
Selection List panel, the display switches to the Scan Copy Pair Inside Storage System panel for
scanning the P-VOL of the PPRC copy pair and generating a copy group definition file. Execute
the YKH2B command to create a copy group definition file for a CA copy group with the HyperSwap
attribute from a PPRC copy pair for which HyperSwaps are enabled. For details about the YKH2B
command, see
Figure 82 (page 94)
Figure 82 Scan Copy Pair Inside Storage System Panel
Table 64 (page 95)
94 ISPF Panels
shows the Sort the Copy Group Pairs List panel.
Description
The order of P-VOL device numbers.
The order of primary volume serial numbers.
The order of S-VOL device numbers.
"YKH2B Command" (page
shows the Scan Copy Pair Inside Storage System panel.
describes the items in the Scan Copy Pair Inside Storage System panel.
217).