Insert Remote Route Entry Panel - HP StorageWorks P9000 Reference Manual
Business continuity manager software reference guide
Hide thumbs
Also See for StorageWorks P9000:
- Manual (333 pages) ,
- User manual (322 pages) ,
- Reference manual (236 pages)
Table of Contents
Advertisement
Table 40 Contents of the Edit Remote Entry Panel
Item
Remote Device Address Domain
Remote Storage System S/N
Device Address for
Command Device
If Enter is pressed while the Edit Remote Route Entry panel is displayed, the information for the
entry is changed as specified and the display returns to the Entire Route Information panel.
Insert Remote Route Entry Panel
If r is specified for AC in the Entire Route Information panel, the Insert Remote Route Entry panel
is displayed to add the storage system entry to be remotely scanned to the next row.
Figure 49 (page 59)
Figure 49 Insert Remote Route Entry Panel
Table 41 (page 59)
Table 41 Contents of the Insert Remote Route Entry Panel
Item
Remote Device Address Domain
Remote Storage System S/N
Device Address for
Command Device
After a remote entry is added, **** is displayed for Devn of the command device of the
corresponding entry in the Entire Route Information panel.
A disk configuration definition file is created that defines only the one command device specified
in this panel. A name that conforms to Configuration File Prefix in the Set Defaults panel and Remote
Device Address Domain in the Insert Remote Route Entry panel is applied to the file in the following
format:
Description
DAD ID within the route
Serial number of the storage system to which the command device
belongs
SSID
SSID to which the command device belongs (modifiable)
CU
CU number to which the command device belongs (modifiable)
CCA
CCA of the command device (modifiable)
shows the Insert Remote Route Entry panel.
describes the items in the Insert Remote Route Entry panel.
Description
Specify the DAD ID assigned to the storage system to be remotely
scanned.
Specify the serial number (alphanumeric characters) of the storage
system to be remotely scanned.
SSID
Specify the SSID of the command device assigned to the storage
system to be remotely scanned, in hexadecimal.
CU
Specify the CU of the command device assigned to the storage
system to be remotely scanned, in hexadecimal.
CCA
Specify the CCA of the command device assigned to the storage
system to be remotely scanned, in hexadecimal.
Discover/Define Configuration Panel (Configuration File Definition)
59
Advertisement
Table of Contents
