HP StorageWorks P9000 Reference Manual page 370

Table 164 Processing for the Specified Startup Status (continued)
Specified startup status
Action Parameters
An action parameter specifies an action for the copy group.
Format
[STATUS=target-status,ACTION=action;[error-action;]]...
Information to be set
Specifies the target status, action, and error action for the copy group.
If the copy group is in the specified target status, the specified action will be executed. If the action
execution results in an error, the specified error action will be executed.
If you want to execute multiple actions, specify the parameters with the same target status in the
order you desire. An example is shown below:
STATUS=SUSPOP,ACTION=RESYNC(MYSI,0,'FORWARD');
STATUS=SUSPOP,ACTION=WAITFOR(MYSI,DUPLEX);
STATUS=SUSPOP,ACTION=SUSPEND(MYSI,'FORWARD');
STATUS=SUSPOP,ACTION=WAITFOR(MYSI,SUSPEND);
"Combinations of Target Statuses and Actions That Can Be Specified" (page 370)
combinations of target statuses and actions that can be specified.
Table 165 Combinations of Target Statuses and Actions That Can Be Specified
Target
status Action
NOP
INVALID Y
370 BCM Monitor Parameter Files
Copy pair status
SIMPLEX
DUPLEX
PENDING
SWAPPING
SUSPOP
SUSPCU
SUSPER
TRANS
HOLDTRNS
INVALID
SUSPVS
REVRSY
NODELTA
CONSLOST
HOLDER
EXI T REPORT WAITFOR RESYNC
Y Y N N
Processing
Places the monitoring status of all copy
groups specified in the CGID parameter
to INACTIVE.
Executes the following commands:
YKRESYNC PREPARE
KEWAIT GOTO(HOLD)
SUSPEND DELETE MAKE
N N N
shows the
SENDMSG STOPPOINT PAUSE
Y Y Y