HP StorageWorks P9000 Reference Manual page 227

NOCOPY
Applies to Continuous Access Synchronous for Mainframe, Continuous Access Asynchronous for
Mainframe, and Continuous Access Journal for Mainframe.
The command makes a copy pair without copying between P-VOL and S-VOL. The command is
used only when the two volume status are exactly the same.
HOLD
Applies to Continuous Access Journal for Mainframe.
The copy pair status is transitioned to the HOLD status.
SELECT({ALL|COND})
Specify the selection method for the copy pair to be manipulated by the command. When not
specified, ALL is assumed.
ALL
All the copy pairs in the copy group are to be manipulated by the command. Note that if the DEVN
parameter is specified, the copy pair specified for the parameter is the execution target of the
command.
COND
The pairs to be manipulated by the command depend on their volume status. For more information,
see the table regarding copy pair statuses that are manipulated by the command in the HP
StorageWorks P9000 for Business Continuity Manager Software Users Guide.
For CG containers specified by EXCTG ID, journal groups not registered in EXCTG are registered
even if there is no volume that is manipulated by the command.
DEVN(p-vol-device-number,s-vol-device-number) ~ <4-digit hexadecimal number, 4-digit
hexadecimal number>
Specify the device number of the copy pair (P-VOL and S-VOL) to operate.
If this parameter is specified for a CG container specified by EXCTG ID, the following operations
are performed because journal groups are not registered in EXCTG.
No. Condition
1 A journal group specified by the DEVN
parameter is already registered in EXCTG.
2 A journal group specified by the DEVN
parameter is not registered in EXCTG.
ONLINE({YES|NO})
Specify whether to make a copy pair if the copy destination volume is online.
YES
Make a copy pair even if the copy destination volume is online.
NO
Do not make a copy pair if the copy destination volume is online.
Operation
Copy pairs that have been made are transitioned
to the DUPLEX status, and then included in
EXCTG.
Copy pairs that have been made are not
included in EXCTG even after they have
transitioned to the DUPLEX status.
Command details 227