Ykimport Command; Ykimport Command - HP StorageWorks P9000 Reference Manual

YKIMPORT Command

Applies to Business Copy for Mainframe, Continuous Access Synchronous for Mainframe, Continuous
Access Synchronous for Mainframe with the HyperSwap attribute, Continuous Access Asynchronous
for Mainframe, and Continuous Access Journal for Mainframe.
Format
YKIMPORT
PREFIX(prefix)
1
BASEGROUP(copy group–ID)
1
Function
This is a TSO/E command.
This command reads the following files and creates a copy group definition file:
Pair information CSV file
CSV file containing information on copy pairs in a CG container
EXCTG information CSV file
CSV file containing EXCTG information in a CG container with a 4x4 configuration (required
only for a 4x4 configuration)
Disk configuration definition file
Copy group definition file
Copy group definition file that defines attributes of a copy group to be created
Before you execute this command, allocate datasets for the CSV files under the following DD names
and catalog the files:
Pair information CSV file: INPAIR
EXCTG information CSV file: INEXCTG
For details about CSV files, see
Function" (page
Parameters
PREFIX(prefix) ~ < prefix of 25 or fewer characters>
Specify the prefix of the copy group definition file
BASEGROUP(copy-group-ID) ~ < GROUP string>
Specify the name of the copy group definition file without the prefix.GRP part that is to be used as
the base.
Maximum length that can actually be specified = 44 - (5 + PREFIX-length)
NEWGROUP(copy-group-ID) ~ < GROUP string>
Specify a name for the copy group definition file that is to be created, without the prefix.GRP part.
Maximum length that can be specified = 44 - (5 + PREFIX-length)
A new copy group definition file is created under the name specified in this parameter. To overwrite
an existing copy group definition file, specify the same name in the BASEGROUP and NEWGROUP
parameters.
Return Codes
Table 1 18 (page 220)
NEWGROUP(copy group–ID)
1
"CSV Files Used by the Copy Group Definition File Generation
355).
lists the return codes to be returned when the YKIMPORT command terminates.
Command details 219