Executing Ykqrypth With Restruct Specified; Manage Copy Groups Panel (Copy Group Operation) - HP StorageWorks P9000 Reference Manual
Business continuity manager software reference guide
Hide thumbs
Also See for StorageWorks P9000:
- Manual (333 pages) ,
- User manual (322 pages) ,
- Reference manual (236 pages)
Table of Contents
Advertisement
Table 72 Contents of the Logical Path Status Panel (continued)
Item
Secondary
Status
In the initial state, the information is displayed in ascending hexadecimal order, in priority order
as follows: Primary (port number), and then Secondary (port number).
Executing YKQRYPTH with RESTRUCT Specified
If the AC in the Manage Path Set panel is set to c, the YKQRYPTH command is executed with the
RESTRUCT parameter specified To use this functionality, see the description in the HP StorageWorks
P9000 for Business Continuity Manager Software Users Guide that explains how to acquire path
information from storage system.
If the return code is within the range from 8 to 32, the Confirm Configuration File Update panel
(see
"Confirm Configuration File Update Panel" (page
of the path set definition file. If you press the Enter key in this panel, the YKSTORE command is
executed, and the path set definition file is updated.
NOTE:
When you update the path set definition file, the CU and CCA are also stored in the path
set definition file for a device, assumed by the system, to which I/Os are issued during the execution
of the YKLOAD command.
Manage Copy Groups Panel (Copy Group Operation)
The Manage Copy Groups panel to operate copy groups is displayed when 5 Manage Copy
Groups is selected from the Main Menu panel.
The Manage Copy Groups panel is shown in
Description
Secondary port number
Status of a physical path
NO PATH: No physical path defined.
ESTABLISHED: The physical path has been established.
INIT FAILED: An initialization error has occurred.
TIME OUT: A timeout has occurred.
NO RESOURCES AT PRI: The port at the primary storage system is
invalid.
NO RESOURCES AT SEC: The port at the secondary storage system is
invalid.
SERIAL# MISMATCH: The storage system serial number does not match.
CONFIG ERROR
I/O ERROR: Information could not be obtained due to an I/O error.
MISMATCH: The defined value and the value specified for the storage
system do not match.
Figure 98 (page
180)) is displayed for confirming the updating
116).
Manage Copy Groups Panel (Copy Group Operation)
1 15
Advertisement
Table of Contents
