Reboot With The New Configuration; Create A System Load Tape (Slt) - HP A3542A User Manual

Reboot with the new configuration

Shut down the system by entering:
CNTRL-A
The cursor will return to the first column in the next line. Now enter:
SHUTDOWN
and press the RETURN key.
When the system is completely shut down, it will respond:
Shutdown of operating system complete.
Now the system can safely be powered down or rebooted. Reboot the system by entering:
START NORECOVERY

Create a System Load Tape (SLT)

This is an optional procedure. Mount a write-enabled tape on the system tape drive (DAT or 1/2" tape).
Ensure the tape is online.
Generate a customized SLT that includes the new configuration by entering the command:
sysgen>TAPE
Reply to the tape request.
The system responds when it has finished generating the SLT by displaying the following message:
** Boot tape is successfully built **
Exit SYSGEN by entering:
sysgen>EXIT
Installation 1-9