Optional Paper Feeder Removals - Lexmark Optra C Service Manual

5045-001

Optional Paper Feeder Removals

The Optional Paper Feeder unit must be removed in order to perform
the following removals.
1. Disconnect the power cord.
2. Remove the two lock pins.
Note: Two persons should be used to lift the printer from the sheet
feeder.
Cassette Feed Solenoid
See Assembly 35-20.
1. Remove the front pickup unit.
2. Remove the screw and the solenoid.
Cassette Size Sensing Board
See Assembly 36-2.
1. Remove the cassette.
2. Open the Open/Close Door.
3. Remove the left cover.
4. Disengage the claw securing the left rail and remove the rail.
5. Remove the screw and the holder cover.
6. Disconnect the connector and remove the leaf spring to remove
the assembly.
7. Disengage the claw securing the board to the assembly.
4-64