Fuser Thermo Switch - Lexmark Optra C Service Manual

5045-001

Fuser Thermo Switch

See Assembly 32-14.
1. Remove the fuser assembly.
2. Place the fuser on a flat surface.
Note: Do not tilt the fuser. It contains oil that can spill.
3. Remove the two screws from the input guide located on the
lower left side of the fuser.
4. Remove the screw from the thermo switch.
5. Disconnect the thermo switch connector and remove the switch.
Note: When reassembling the input guide, make sure the two oil
ducts are lined up inside the guide.
4-32