Wrinkles; Leading-Edge Fold - Lexmark Optra C Service Manual

5045-001

Wrinkles

FRU
1 Paper
2 Paper
3 Pickup unit
4 Paper guide
5 Fuser entrance
guide
Fuser unit

Leading-Edge Fold

FRU
1 Paper
2 Paper
3 Excessive
paper (manual)
4 Paper setting
(cassette)
5 Cassette claw
2-44
Action
Is recommended paper being used? Advise the user
to use recommended paper.
Do the wrinkles disappear when you use new
paper? As the paper probably was moist, advise the
user on the correct storage method.
Open the front cover while the paper is between the
pickup and fuser units. Is the paper wrinkled? Or is
the paper being transported with a skew? Check the
pickup unit.
Is toner or other foreign matter on the paper guide?
Clean the guide.
Is the fuser entrance guide soiled? Clean the guide.
If no, replace the fuser unit.
Action
Is recommended paper being used? Advise the user
to use recommended paper.
Is the paper curled or otherwise deformed? Replace
the paper. Advise the user on the correct storage
method.
Is more paper placed at the pickup slot than
suggested? Advise the user not to place more than
the suggested amount of paper.
Is the paper set properly against the cassette claw?
Set the paper correctly.
Is the cassette claw deformed? Replace the
cassette claw. If no, check the paper feed unit, and
replace any flawed or deformed parts.