5045-001
Paper Delivery Assembly
See Assembly 26-1.
For cover removals, see
1. Remove the top cover.
2. Open the fuser access door.
3. Remove the connector from the front of the paper delivery
assembly.
4. Remove the screw from the paper drive assembly and remove
the assembly.
5. Pull up on the rear of the paper delivery assembly and slide the
assembly to the rear out of the frame.
Note: Take care when working around the sensor and the flag on
the front of the paper delivery assembly. The sensor signals the
printer it is time for the 60K maintenance.
4-44
"Cover Removals" on page
4-8.