Multi-Feed - Lexmark Optra C Service Manual

5045-001

Multi-Feed

FRU
1 Paper
2 Location
3 Cassette
4 Separation
roller
Spring(s) *
5 Separation pad
Spring
(see Chapter 7,
Asm 25-5)
* See "Cassette Paper Pickup Asm" on page
springs are not referenced, but attach to the same plastic assembly
that reference number 7 uses.
Action
Is recommended paper being used? Advise the user
to use recommended paper.
Does it occur in the manual feeding tray? Check step
5. (Cassette, check step 4).
Is the print paper placed properly against the
cassette claw? Place the paper correctly.
Is the separation roller worn or deformed? If yes,
replace the separation roller. If no, replace the
spring(s) pulling the separation roller.
Is the separation pad surface worn? Replace the
separation pad. If no, replace the separation pad
spring.
7-48, (Asm 24). These
Diagnostic Information 2-43