Fuser Oil Apply Assembly - Lexmark Optra C Service Manual

5045-001

Fuser Oil Apply Assembly

See Assembly 32-5.
1. Remove the fuser assembly.
2. Place the fuser on a flat surface.
Note: Do not tilt the fuser. It contains oil that can spill.
3. Remove the two extension springs from the fuser oil apply
housing (one at the front and one at the rear).
4. Remove the four screws from the oil bottle case assembly and
pull the assembly out far enough to remove the screw from the
oil apply locator pin.
5. Work the oil apply assembly out of the fuser.
4-34