5045-001
Transfer Drum Attraction Roller
See Assembly 28-9.
1. Remove the transfer drum and holder assembly.
2. Remove the spring at each end of the attraction roller holder.
3. Remove the screw from the attraction roller mounting pin
located on the lower left corner of the transfer drum holder front
plate and remove the pin.
4. Remove the attraction roller holder from the transfer drum
holder.
5. Place a screwdriver blade through the holes in each end of the
attraction roller holder and push the attraction roller out of the
holder.
6. Remove the guide roller from each end of the attraction roller.
CAUTION: Do not touch the attraction roller with your bare hands.
Repair Information 4-53