Cassette Paper Pickup Pcb; Cassette Paper Pickup Assembly - Lexmark Optra C Service Manual

5045-001

Cassette Paper Pickup PCB

See Assembly 24-13.
1. Open the multipurpose paper pickup door.
2. Release the two green cassette latches.
3. Slide the cassette out enough to remove the two retaining
brackets and remove the cassette assembly.
4. Tip the cassette back and remove the three bottom cover
screws and the cover.
5. Disconnect the connectors from the PCB.
6. Remove the two connector mounting bracket screws and the
bracket.
7. Remove the two PCB screws and the PCB.

Cassette Paper Pickup Assembly

See Assembly 24-1.
1. Open the multipurpose paper pickup door.
2. Release the two green cassette latches.
3. Slide the cassette out enough to remove the two retaining
brackets and remove the cassette assembly.
4. Remove the three cassette cover mounting screws.
5. Remove the cover.
6. Remove the two bottom cover trim screws and trim.
7. Remove left pivot plate mounting screw and the pivot plate.
8. Remove the two gear train cover screws and the cover.
9. Disconnect the paper sensor and solenoid connector.
10. Remove the static spring from the right side of lock slide shaft.
11. Remove the E- clip from arm stud and remove the link.
12. Separate the cassette paper pickup assembly from the
multipurpose tray assembly.
Repair Information 4-5