Cassette Paper Pickup Solenoid; Corona Assembly - Lexmark Optra C Service Manual

5045-001

Cassette Paper Pickup Solenoid

See Assembly 24-10.
1. Open the multipurpose paper pickup door.
2. Release the two green cassette latches.
3. Slide the cassette out enough to remove the two retaining
brackets and remove the cassette assembly.
4. Remove the two screws and the motor drive cover.
5. Tip the cassette back and remove the three bottom cover
screws and the cover.
6. Disconnect the motor connector from J303 and remove the
cable from the clamps.
7. Remove the solenoid mounting screw and the solenoid.

Corona Assembly

See Assembly 30-5.
1. Open the top cover.
2. Squeeze the latch at the front end of the corona housing, push
the corona housing to the rear and lift out.
Repair Information 4-7