5045-001
Adjustments
Density Adjustment Panel
See
"Density Adjustment Panel" on page
There are no mechanical adjustments.
Service Information
Releasing Plastic Latches
Many of the parts are held in place with plastic latches. To remove
such parts, press the hook end of the latch away from the part to
which it is latched.
Screws
This printer is screw intensive. All screws are phillips head. In
addition, all parts are pinned, so re-assembly requires no
mechanical adjustments. Parts are attached by color-coded screws.
•
When a metal part is fastened to another metal part, the screws are
silver.
•
When plastic is fastened to metal, the screws are gold.
•
When plastic is secured to plastic (or metal to plastic) the screws are
either black or silver and have self-tapping threads.
As you disassemble the machine, keep each FRU separate and
keep the screws for that FRU with the FRU. This will prevent
confusion due to different screw lengths.
4-2
3-12.